Surface domination of restoration and long-lasting preservation
KEEP YOUR TRIM.
SEMI-HARD COATING PROTECTION
Autotriz Plastic & Trim offers the best solution to protect the trim and moulding against harmful UV rays which can lead to pre-mature aging like fading out and discolouration. Unlike Polysiloxane based ceramic coating which might crack or brittle leaving whitish residue over time, Autotriz Plastic & Trim is a flexible and softer coating which is resistance to cracking on bending.
ABSOLUTE CHOICE OF PROTECTION
The world’s most significant nano ceramic coating that provides semi-hard protection for all types of plastics and trims.
COMMON PROBLEMS ON PLASTIC & TRIM
Plastic deteriorates over time due to elements such as acid rain, dirt, and soil.
UV ray from the sunlight can cause rapid discolouration of plastic trims.
Over time plastic will degrade and turn dull in color naturally.
Enhances the Natural Look
Restore, enhance, and maintain the rich blackness of all plastic surfaces.
Protection Against Deterioration
A permanent solution for plastic deterioration as it acts as a layer of protection in preventing the usual wear and tear of plastic.
Protect Against Harsh Chemicals
Resist chemicals that are harmful to the plastic and/or increase the speed of deterioration of the plastic.
Prevents Premature Aging
Contains UV Inhibitor to protect against sunlight's UV rays that will cause plastic parts to turn dull or fade.
Contains UV inhibitor to prevent fading.
Minimize/ reduce scratches caused by regular washing
Will not become crack or brottle over time
All Weather Protection
Suitable for all kinds of harsh weather conditions.
The coating does not lose its stability under high temperature.
Temporary trim dressings will no longer needed
Clean the surface thoroughly to be free of waxes, sealants, tar, oils, grease, or any other contaminants on the surface.
Wrap the applicator sponge with the white microfiber suede cloth that comes with the box or use the applicator of your preference. Foam applicators can also be used as a substitute.
Apply AUTOTRIZ Plastic & Trim Coating using normal pressure on the applicator.
Gently wipe off the residue with a clean, lint-free microfiber towel
Wait 60 minutes before adding an additional layer for maximum protection.
Allow curing of coating to begin. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.
Keep coating away from all polish and compound dust during the curing process.
APPLICATION ON HEADLIGHTS
After headlights or headlamps are sanded with P3000 grit sandpapers, apply V3 Plastic Coating using normal pressure on the applicator.
Make sure the area is well covered.
Always start from an edge to avoid excess on other panels.
Work in horizontal or vertical movements to ensure that product is carried through consistently. Leaves the residue without wiping.
Wait for 30-60 mins. Apply the second layer with the previous step.
Observe the sanding marks, and if the headlights or headlamps are crystal clear. Restoration is done.
BEGLEITEN SIE UNS
Interessiert daran, ein
Wenn Sie an unseren Produkten interessiert sind oder mit uns zusammenarbeiten möchten, senden Sie uns eine Nachricht und wir werden uns mit Ihnen in Verbindung setzen, um einen kurzen Anruf zu vereinbaren, oder kontaktieren Sie uns über unsere E-Mail-Adresse firstname.lastname@example.org
Sobald diese Informationen eingegangen sind, wird unser Team die Konten überprüfen und sich mit Ihnen in Verbindung setzen.