top of page
3D Matrix Booster

A prominent barrier of anti-aging protection with enhancement

YOUR PPF.

3D Matrix Booster

CLEANER.

ANTI-PERMEATION PROTECTION

AUTOTRIZ PPF & Vinyl Wrap is a specialized flexible coating for all types of paint protection film. For Polyurethane film, matte and satin wraps and vinyl film. It formulated with heavy ultra-violet (UV) inhibitor to protect film against sun UV damage. ​ It offers strong resistance to chemicals and environmental damage like acid rain marks which causes yellowing of film. It also prolongs the lifetime of the wrapped film with less maintenance and easier to clean.

Technisches Datenblatt
Sicherheitsdatenblatt

UNRIVALED PRESERVATIVE PROTECTION

Innovative nano ceramic coating that gives significant enhancement and preservation to improve and prolong your PPF.

COMMON PROBLEMS ON PPF & VINYL WRAP

Discoloration

Due to overexposure to UV rays from sunlight, PPF and Wrap will turn yellowish.

Tree Sap & Bird Drops

Tree sap and bird drops cause common PPF & Wrap staining problems.

Staining on PPF & Wrap

Paint Protection Film and Vinyl Wrap will build up stains in the long run.

LEISTUNGEN

Improve PPF & Vinyl Wrap Performances

Increase the protection and stain resistant performances of PPF & Vinyl Wrap

autotriz_leather_coating_steering.jpg

Increase the Lifespan of PPF & Vinyl Wrap

Slows down the deterioration of PPF & Vinyl Wrap

Slows Down Yellowing & Discolouration

Absolute UV protection significantly slows down the discoloration of PPF & vinyl wrap.

Stain Protection

Protect films against the build-up of permanent stains such as tree saps, dead bugs, water spots, and more.

HAUPTMERKMALE

UV Proteciton.png

UV protection

Preserves wrapped surfaces against aging and discoloration.

UV Proteciton.png

High gloss

Improves the shine and enhances the surface's color.

UV Proteciton.png

Anti-static

Reduce surface friction and prevent the build-up of dust/dirt.

UV Proteciton.png

Stain protection

Effectively against debris, sap, water spots, and other contaminants.

UV Proteciton.png

Chemical resistance

Protect surfaces from all kinds of strong chemicals.

UV Proteciton.png

Super hydrophobic

Protect surfaces from all kinds of pollutants with super hydrophobicity.

Gebrauchsanweisung

Shake well before use.

Get ready with 3 pieces of a brand new, lint-free microfiber towel. (It is recommended that new towels to be rinsed or washed with water prior to use to reduce the loosing lint)

When first applying AUTOTRIZ PPF & Vinyl Wrap Coating on the substrate, it is recommended to condition the surface of the puff applicator with 7-8 drops to prevent skipping or dry spots.

Do not work on a large area at a time. It is recommended to do a 2 ft. x 2 ft. area at a time.

Apply AUTOTRIZ PPF & Vinyl Wrap Coating using normal pressure on the applicator. Make sure the area is well covered. Always start from an edge to avoid excess on other panels. Work in controlled areas to remember where you previously applied. Work in horizontal or vertical movements to ensure that product is carried through consistently.

AUTOTRIZ PPF & Vinyl Wrap Coating is tacky and feels sticky like glue to remove. Wait for 5-10 seconds only. Use the first towel to buff off the product using harder pressure.

Go immediately over with a second microfiber towel with polishing motion until the film is completely free from residue.

Follow by the third towel (this is called the “insurance towel”) and go over the surface one extra time just to make sure you haven’t missed any streaks or excess residue just to make sure you haven’t missed any streaks or excess residue.

When the whole car is applied, allow the curing of the coating to begin.

If a white haze appears, it is normal. They will disappear after to coating is cured.

Wait approximately 30-60 minutes before applying a second layer.

Curing times depend on temperature and humidity. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.

BEGLEITEN SIE UNS

Interessiert daran, ein

AUTOTRIZ-Partner?


Wenn Sie an unseren Produkten interessiert sind oder mit uns zusammenarbeiten möchten, senden Sie uns eine Nachricht und wir werden uns mit Ihnen in Verbindung setzen, um einen kurzen Anruf zu vereinbaren, oder kontaktieren Sie uns über unsere E-Mail-Adresse info@auto-triz.com

Sobald diese Informationen eingegangen sind, wird unser Team die Konten überprüfen und sich mit Ihnen in Verbindung setzen.

arrow&v

Danke fürs Einsenden!

bottom of page