PART #: AT-V7-300
An Eco-friendly, environmental friendly, non-toxic and VOC compliant nano technology formula. Protects against permanents stains from spills of food and drinks. Soils can be vacuumed away or wiped off with a gentle cleaning solution.
Retains the natural feel and texture of fabric without affecting its appearance and breath-ability. Excellent hydrophobic effects with water angle up to 150°.
- Breathable fabric
- Super Hydrophobic effects
- Non-toxic formula
- Environmental friendly
Fabric Coating is particularly suitable for any textile or fabric material, umbrella, bags, shoes, outdoor gears
Fabric Coating can be applied with pressure spray applicator, HVLP Spray Gun, Sure Shot A1000G Sprayer or Titan 19421 Sprayer.
Base: Modified resin
Curing: Normal ambient temperature
Shelf Life: 12 months
Container Size: 300ml
INSTRUCTIONS FOR USE
The product is for professional use and should be applied by approved applicators only. Test on a small area or apply a test coat before application.
APPLICATION OF V7 FABRIC COATING
Apply with pressure spray applicator, HVLP Spray Gun, Sure Shot A1000G or Titan 19421
Begin on headliner applying a fine mist.
Next, treat the seating areas, door and trim panels, and, finally the carpeting. If there is any product left over spray the floor mats and trunk liner
One 300ml bottle treats the average vehicle.
Pay particular attention to the driver’s seat and the immediate surrounding area due to increased wear and likelihood of spills. Dry time is approximately 1 hour; maximum repellent is achieved after 24 hours.
Product is supplied with a cap and trigger sprayer nozzle separately. Always tighten the bottle with cap after every use. Trigger sprayer nozzle should be emptied and air dried for next use to avoid blockage.
EFFECTS & PERFORMANCE
Super Hydrophobic Effects on Car Seat
Water-proof Effects on Tissue Paper
Super Hydrophpbic Effects on Textile Luggage