PART #: AT-V5-50B/ 50R
New fluorine based protection for glass. Provides extreme durability against abrasion of wiper blades. Its super hydrophobic effect to allow rain flowing off windscreen at speed as low as 60 km/h.
Effectively provides exceptional optical clarity by cutting glare at night and improves driver’s safety during rain. One application lasts up to 18 months.
- Super hydrophobic effects
- Resists wiper abrasion
- Improves visibility in rain
- Increases safety
- Reduces glare at night
- Long durability
- Perfect for windscreens
Glass Coating is particularly suitable for front and rear windscreen with wiper abrasion.
Glass Coating can be applied with microfiber applicators or tack cloth.
TECHNICAL DATA (V5B/ V5R)
Appearance: Colourless/ Light Blue
Curing: Normal ambient temperature
Shelf Life: 12 months
Container Size: 50ml / 50ml
INSTRUCTIONS FOR USE
The product is for professional use and should be applied by approved applicators only. Test on a small area or apply a test coat before application.
APPLICATION OF V5 GLASS COATING (Base) + (Reactor)
Buff the glass surfaces thoroughly with Glass Compound (Cerium Oxide based) and make sure the surface is completely dry and free of oils.
Mix the V5 Glass Coating- Base(Green bottle) and V5 Glass Coating- Reactor(Blue bottle) with 1:1 ratio in a volume cup
Use 5ml+5ml for a windscreen; 15ml+15ml for whole car.
Wrap the applicator sponge with the white microfiber suede cloth that comes with the box or use applicator of your preference.
Use a syringe to pump in and out of product mixture on the applicator.
Wipe on entire windshield beginning on the driver’s side then passenger side. Apply one layer of product by working in horizontal (front and rear windscreen) movements in slow motion to ensure that product is carried through evenly.
Mixture of V5 Glass Coating is absorbed into the microscopic pores of glass instantly, instead of forming a layer on top of glass surface.
Wait approximately 15-20 minutes; wipe off completely using clean microfiber towels until all residue is removed.
V5 Glass Coating must be used within 30 minutes after mixing as it will lose its functionality after the chemical reaction periods. Finish all the mixture and do not re-use for next application. Do not expose to water within 4 hours. Do not turn on wipers for 24 hours for maximum durability.
EFFECTS & PERFORMANCE
Super Hydrophobic Effects