top of page
3D Matrix Booster

The promising surface protection that brings innovation


3D Matrix Booster



Autotriz 3D Matrix Ultra is a highly durable organopolysilazane-based ceramic coating that protects the paintwork against environment elements. It is a state-of-the-art nano coating that showcases the latest advances in Polysilazanes. It is scientifically proven by scientists and nano technologist to be more competitive products compared to Polysiloxane based polymer resin, promising a peace-of-mind protection.

Lembar Data Keselamatan


Bring you the ultimate protection against all types of harmful elements that damage the paint of a vehicle.



Bird drops, tree sap, tar, dirt, and more are factors that will lead to staining and contamination of body paint.


Magnesium chloride is added to ice during winter season

Environmental Damage

Harsh weather conditions such as storms and extreme sunlight


Super Hydrophobic

Incredible hydrophobic properties with water contact angle up to 115°


Diminish Scratches & Swirls

Above 9H hardness of state-of-art nano technology with polysilazane properties offers promising protection in minimizing scratch damage.

Intense Gloss & Clarity

State-of-art innovation of paint protection coating with an incomparable level of gloss, durability, and resistance that enhances surface reflections and shininess.

Stain Resistant

Proven to outperform traditional nano ceramic coating with incomparable performance and protection, excellence in preventing water spots, stains, dirt, and more.


UV Proteciton.png

Chemical resistance

Cannot be washed off by strong chemicals and harsh detergents.

UV Proteciton.png


Improves cleaning experience as dirt can be washed off easily.

UV Proteciton.png

UV protection

Protect against the overexposure of sunlight that cause color fading.

UV Proteciton.png

Weather protection

Perfect in all kinds of weather conditions such as snow, rain, and more.

UV Proteciton.png

Permanent bond

Superior to Siloxane based coating and other traditional coatings.

UV Proteciton.png

Thermal resistance

The coating does not lose its stability under high temperatures

Petunjuk Penggunaan

Shake well before use.

Get ready with 3 pieces of a brand-new, lint-free microfiber towel. (It is recommended that new towels to be rinsed or washed with water prior to use to reduce the loosing lint)

When first applying AUTOTRIZ 3D Matrix Ultra Coating on the substrate, it is recommended to condition the surface of the applicator block with 7-8 drops to prevent skipping or dry spots.

It is recommended to do a 2 ft. x 4 ft. area or 4 ft. x 4 ft. at a time.

Apply AUTOTRIZ 3D Matrix Ultra Coating using normal pressure on the applicator. Make sure the area is well covered. Always start from an edge to avoid excess on other panels. Work in controlled areas to remember where you previously applied. Work in horizontal or vertical movements repeatedly to ensure that product is penetrated through a clear coat.

Wait for 30 seconds to 1 minute (time is vary from different countries and different seasons depending on temperature or humidity, ask distributors for recommendations), and use the first towel to level the product.

Go immediately over with a second microfiber towel with a polishing motion until the surface is free from residue.

Follow by the third towel (this is called the “insurance towel”) and go over the surface one extra time just to make sure you haven’t missed any streaks or excess residue.

When the whole car is applied, allow curing of the coating to begin. Wait approximately 30-60 minutes before applying a second layer. Curing times depend on temperature and humidity. Applying the product too early will dissolve the previous layer. For the ultimate in hydrophobic results and durability, it can be over-coated with AUTOTRIZ TOP COAT.


Lighting is of utmost importance during the application of the coating to paint. Spot Light like Scangrip is a good lighting system to inspect paint defects during polishing but in fact, it is NOT RECOMMENDED to use to check the residue of coating left on the paint. The suitable lighting system is Diffused Light.


Tertarik untuk menjadi seorang


Jika Anda tertarik dengan produk kami atau ingin bekerja sama dengan kami, kirimkan pesan kepada kami dan kami akan menghubungi Anda untuk menjadwalkan panggilan cepat atau hubungi kami melalui email kami

Setelah informasi ini diterima, tim kami akan meninjau akun dan menghubungi Anda.

Terima kasih telah mengirimkan!

bottom of page