A prominent barrier of anti-aging protection with enhancement
AUTOTRIZ PPF & Vinyl Wrap is a specialized flexible coating for all types of paint protection film. For Polyurethane film, matte and satin wraps and vinyl film. It formulated with heavy ultra-violet (UV) inhibitor to protect film against sun UV damage. It offers strong resistance to chemicals and environmental damage like acid rain marks which causes yellowing of film. It also prolongs the lifetime of the wrapped film with less maintenance and easier to clean.
UNRIVALED PRESERVATIVE PROTECTION
Innovative nano ceramic coating that gives significant enhancement and preservation to improve and prolong your PPF.
COMMON PROBLEMS ON PPF & VINYL WRAP
Due to overexposure to UV rays from sunlight, PPF and Wrap will turn yellowish.
Tree Sap & Bird Drops
Tree sap and bird drops cause common PPF & Wrap staining problems.
Staining on PPF & Wrap
Paint Protection Film and Vinyl Wrap will build up stains in the long run.
Improve PPF & Vinyl Wrap Performances
Increase the protection and stain resistant performances of PPF & Vinyl Wrap
Increase the Lifespan of PPF & Vinyl Wrap
Slows down the deterioration of PPF & Vinyl Wrap
Slows Down Yellowing & Discolouration
Absolute UV protection significantly slows down the discoloration of PPF & vinyl wrap.
Protect films against the build-up of permanent stains such as tree saps, dead bugs, water spots, and more.
Preserves wrapped surfaces against aging and discoloration.
Improves the shine and enhances the surface's color.
Reduce surface friction and prevent the build-up of dust/dirt.
Effectively against debris, sap, water spots, and other contaminants.
Protect surfaces from all kinds of strong chemicals.
Protect surfaces from all kinds of pollutants with super hydrophobicity.
Instructions For Use
Shake well before use.
Get ready with 3 pieces of a brand new, lint-free microfiber towel. (It is recommended that new towels to be rinsed or washed with water prior to use to reduce the loosing lint)
When first applying AUTOTRIZ PPF & Vinyl Wrap Coating on the substrate, it is recommended to condition the surface of the puff applicator with 7-8 drops to prevent skipping or dry spots.
Do not work on a large area at a time. It is recommended to do a 2 ft. x 2 ft. area at a time.
Apply AUTOTRIZ PPF & Vinyl Wrap Coating using normal pressure on the applicator. Make sure the area is well covered. Always start from an edge to avoid excess on other panels. Work in controlled areas to remember where you previously applied. Work in horizontal or vertical movements to ensure that product is carried through consistently.
AUTOTRIZ PPF & Vinyl Wrap Coating is tacky and feels sticky like glue to remove. Wait for 5-10 seconds only. Use the first towel to buff off the product using harder pressure.
Go immediately over with a second microfiber towel with polishing motion until the film is completely free from residue.
Follow by the third towel (this is called the “insurance towel”) and go over the surface one extra time just to make sure you haven’t missed any streaks or excess residue just to make sure you haven’t missed any streaks or excess residue.
When the whole car is applied, allow the curing of the coating to begin.
If a white haze appears, it is normal. They will disappear after to coating is cured.
Wait approximately 30-60 minutes before applying a second layer.
Curing times depend on temperature and humidity. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.
Interested in becoming a
If you are interested in our products or keen to work with us, send us a message and we will get in contact with you to schedule a quick call or contact us via our email firstname.lastname@example.org
Once this information has been received our team will review the accounts and get into contact with you.